Product Parameters
The flooring is available in two sizes: 500 (standard version) and 501 (open version)
Both specifications of the material are composed of painted steel plate, which is filled with lightweight mortar,
1. the size is 500*500mm,
2. the thickness is t28,
3. the completion height is 55~160mm (other completion heights can be negotiated separately),
4. the weight that can be borne is about 40kg per square meter,
5. the load performance concentrated load is 3000N,
6. the deformation amount is less than 5.0mm,
7. and the non-combustion performance is one level (combustion 0).
Characteristics
- Excellent anti-static performance
- Flame retardant, anti-skid, anti-rust, anti-soil
- Mighty glue, strong wear-ability, non-bubble
- Class A flame spread and smoke development rating
- 500*500mm size panels are available
Steel Cementitious Panel (Anti-Static Laminate / PVC etc. on Top) Raised Floor Feature:
- Excellent rolling load & ultimate load performance.
- Light weight cement makes panels solid and quite.
- Black and grey epoxy paint finish for long time protection.
- Class A flame spread and smoke development rating.
- Convenient installation supplies an excellent solution for office integrity, wiring and data cable service.
suppor foot type
The J series has two types, standard version and edge version, and the height adjustment range is different, please refer to the figure below for details (other heights other than the table below can be negotiated separately).
Standard type
Supports standard foot types |
Adjustment range |
GL 12*30~50 |
50~85 |
GH 12*65~110 |
85~160 |
GHH 12*135~455P |
160~515 |
Edge type
Supports the foot folding type |
Adjustment range |
GCL 12*25~50 |
50~90 |
GCH 12*60~110 |
85~160 |
GCHH 12*135~455-P |
160~515 |
It is mainly used for all requirements that high loading ability, better pavement performance high-end applications, such as office, banks, telecommunication rooms, intelligent office, commercial business, exhibitions, workshops, control rooms, converting rooms, and other industries program-controlled room, etc.
1. Install lighting fixtures on the back of the all-steel floor, which can make the floor have the function of night lighting or performance lighting.
2. Part of the floor can be converted into a flat small stool, which can constitute a temporary reception place, meeting place.
3. The steel floor with the floor edge fixing device to achieve the stability and non-shaking of the double-layer floor, if the subsequent maintenance is required, the floor is easy to disassemble, and it can continue to be used after maintenance.
4. There are two types of floor support feet to choose from, and the height of the support feet can be adjusted according to the required height, flexibly adapting to different floors.
5. The floor has strong bearing capacity, and the bearing capacity meets the approved load of 3000N (JAFA standard).
Detailed Photos
Shipping method
The products you purchase will be delivered to you in one of several ways.
Company Introduction
Our floor has been tested by the National Information Industry Anti-static Product Quality Supervision and Inspection Center that the load-bearing capacity is greater than the light one, which is less than the ordinary type, and is a light-duty floor with a larger load-bearing product.
Since the establishment of the factory, our products have been strictly implemented in accordance with the most stringent industry standards of Japan's JAFA industry standards, which is completely different from the domestic manufacturers' factory standards.
Domestic well-known enterprises & communication operators & banks and large central enterprises and state-owned enterprises usually use high-quality manufacturer products when they have clear standards for products and need to pay attention to the project & corporate image after construction.
DEVELOPMENT PATH
1969Year
Japan's headquarters wasestablished in the west of Osaka
1970Year
The site has been developed for the development anddevelopment of the floorspecial support for the floorin the western district of Osaka, and the anti-staticvinyl resin tiles have beensold.
1971Year
Formal establishment of the floor construction management department.
1974Year
The construction industry islicensed by the Osaka government to develop and develop radiological protection materials
The company's products have passed the ISO quality system certification, and have passed the certification of the information industry anti-static product quality supervision center and the national building decoration materials quality supervision and testing center certification.
We are one of the few manufacturers that can support difficult and super large projects. Our company passed ISO9001 and SGS certification.
Qingdao Kiyoh Machinery Co., Ltd. mainly produces and operates OA network flooring and its accessories. The company covers an area of 40,000 square meters and a construction area of 15,000 square meters.
The company has always adhered to the concept of customer satisfaction, continuous improvement and quality assurance, established product planning from the perspective of customers, and carried out design, material selection and experiment after full verification, and gradually moved towards standardization.
We'v been stuck to our core values: we are not just producing raised floor, we are producing values for our customers. Rich production and construction experience ensure us to offer professional solutions for contractors, builders, designers and owners.
Our products are widely used in office buildings, data centers, control rooms, clean rooms, etc.
All products are mainly sold to Japan, South Korea, Taiwan and Southeast Asia and other countries and regions, and have been well received by new and old customers.
So far, we have many successful cases, and we can show you a few relatively large cases here.